• Po: Box: 239805, Dubai -UAE

Ecology Unit

There are many variations amet, vix an natum labitur eleifend, mel
amet a laoreet menandri. Ei justo complectitur duo. Ei mundi
solet ut soletu mel possit quo.

Ecology Unit

What is Ecology unit

An ecology unit is specially designed filter arrangement system for the removal of oil, grease, smoke, and adour from kitchen extract systems, this purification can be achieved using either mechanical filtration or electronic filtration. Mechanical filtration units consist of a series of mechanical filtration whereas electronic filtration units consist of electrostatic precipitators (electronic cells) along with mechanical filters for air purification, both types of filtration have an adour control section followed by a fan section. Ecology unit is considered a perfect solution for kitchen which usually serve hotels, restaurants, hospitals, food industry.

Ecology Unit

What is Ecology unit

An ecology unit is specially designed filter arrangement system for the removal of oil, grease, smoke, and adour from kitchen extract systems, this purification can be achieved using either mechanical filtration or electronic filtration. Mechanical filtration units consist of a series of mechanical filtration whereas electronic filtration units consist of electrostatic precipitators (electronic cells) along with mechanical filters for air purification, both types of filtration have an adour control section followed by a fan section. Ecology unit is considered a perfect solution for kitchen which usually serve hotels, restaurants, hospitals, food industry.

Key Features

CAPACITY RANGE: 600 CFM TO 25000 CFM

DOUBLE SKIN CONSTRUCTION

UL CERTIFIED FILTERS

RUGGED DESIGN, ALL REMOVABLE PANELS

MULTI STAGE FILTRARION FOR EFFECTIVE OIL, GREASE, SMOKE AND ODOUR REMOVAL

• ETL LISTED ELECTROSTATIC PRECIPITATOR FOR HANDLING GREASE, OIL AND SMOKE WITH MANUAL WASH
• WASHABLE TYPE, 2 INCHES THICK METALIC PANEL FILTERS, G2 CLASS, DUST WEIGHT ARRESTANCE OF 75 TO 85% AS PER EN 779 STANDARDS
• DISPOSABLE TYPE 4 INCHES THICK FIBER GLASS POCKET FILTERS, G2 CLASS, DUST WEIGHT ARRESTANCE MORE THAN 90% AS PER EN 779 STANDARDS
• DISPOSABLE TYPE, 24 INCHES DEEP, FIBER GLASS POCKET FILTERS, F7 CLASS, DUST SPOT EFFICIENCY BETWEEN 80TO 90% AS PER EN 779 STANDARDS
• REFILLABLE TYPE, 24 INCHES DEEP, CANISTER TYPE ACTIVATED CARBON FILTERS WITH DWELL TIME OF 0.1 SECOND

Key Features

CAPACITY RANGE: 600 CFM TO 25000 CFM

DOUBLE SKIN CONSTRUCTION

UL CERTIFIED FILTERS

RUGGED DESIGN, ALL REMOVABLE PANELS

MULTI STAGE FILTRARION FOR EFFECTIVE OIL, GREASE, SMOKE AND ODOUR REMOVAL


• ETL LISTED ELECTROSTATIC PRECIPITATOR FOR HANDLING GREASE, OIL AND SMOKE WITH MANUAL WASH
• WASHABLE TYPE, 2 INCHES THICK METALIC PANEL FILTERS, G2 CLASS, DUST WEIGHT ARRESTANCE OF 75 TO 85% AS PER EN 779 STANDARDS
• DISPOSABLE TYPE 4 INCHES THICK FIBER GLASS POCKET FILTERS, G2 CLASS, DUST WEIGHT ARRESTANCE MORE THAN 90% AS PER EN 779 STANDARDS
• DISPOSABLE TYPE, 24 INCHES DEEP, FIBER GLASS POCKET FILTERS, F7 CLASS, DUST SPOT EFFICIENCY BETWEEN 80TO 90% AS PER EN 779 STANDARDS
• REFILLABLE TYPE, 24 INCHES DEEP, CANISTER TYPE ACTIVATED CARBON FILTERS WITH DWELL TIME OF 0.1 SECOND

Contaminated air is drawn by the motor/blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 microns, pass into a strong electrical field (12.5kv) (ionizing section) where the particulate receives an electrical charge. The charged particles then pass into a collector plate section made up of series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6kv-7kv) (collecting section) as the particles, which repel, while the interleaving plates are grounded, which attract and collect the contaminants. The contaminants are held in these plates until they are washed away.

 

Contaminated air is drawn by the motor / blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 microns, pass into a strong electrical field (12.5kv) (ionizing section) where the particulate receives an electrical charge.The charged particles then pass into a collector plate section made up of series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6kv-7kv) (collecting section) as the particles, which repel, while the interleaving plates are grounded, which attract and collect the contaminants. The contaminants are held in these plates until they are washed away.

Efficient : Purifier collects the particle as micro as 0.01 microns at a rate of 99%

Flexible : Modularized parts are easy to assemble as per different air-flow and requirements

Convenient : Drawer-style modularized parts are easy to fix and maintain

Advanced : Electrostatic power control system adjusts the electric field intensity automatically

Safe : Safety system automatically protects all units by the flashing tracking

Stable : Overload protection in the power system ensures the stable running.

Economic : Long term service, lower power consumption, less space occupation

ALL THE LAST SECTIONS ARE enclosed in a double skin penta post aluminium profile construction with the mechanical / electronic filters, carbon filters and fan fitter inside the cabinet, the outer skin is 0.5mm pre-painted Gl or GSS and the inner skin is of 270 gsm 0.5mm plain gss. the framework is made of extruded aluminium hollow profiles. the standard sandwich panel is 25 mm thick filled with either rockwool, or fiberglass or puf as insulation material, the cabinet can also be manufactured with 50 mm thick panels if required, the cabinet has removable type access doors for cleaning, maintenance & replacemnent of filters. the entire cabinet is mounted on a galvanized steel c-channel with same reinforcements across the unit base. the cabinet can also be supplied with a drain pan and drain connection if required for removal of excess oil and grease flowing down the specific filters, the unit can also be manufactured in section for ease of transpor- taion and handling.

METALLIC PRE-FILTER (G2 GRADE):
Metallic washable pre-filters with 2″ thickness (4″ thick- ness also available on request) having multiple layers of pleated galvanized wire as a standard metal media are available in aluminum, G2 and SS construction formed into a compact maze of dirt catching surfaces. The metal media are available in aluminium, G2 and SS Construc- tion. Owing to their excellent dirt holding capacity and ability to perform in high moisture conditions, they are suitable for use as grease filters in kitchen hoods. The average arrestance is 75-85% and classified as G2 in accordance with EN779 Standard.

This filter is designed to remove high oil and grease content from the exhaust air. The metallic filter is washable type and requires regular maintenance by washing the filter in a solution of detergent & warm water and dried with compressed air.

 

Contaminated air is drawn by the motor/blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 microns, pass into a strong electrical field (12.5kv) (ionizing section) where the particulate receives an electrical charge. The charged particles then pass into a collector plate section made up of series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6kv-7kv) (collecting section) as the particles, which repel, while the interleaving plates are grounded, which attract and collect the contaminants. The contaminants are held in these plates until they are washed away.

 

Contaminated air is drawn by the motor / blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 microns, pass into a strong electrical field (12.5kv) (ionizing section) where the particulate receives an electrical charge.The charged particles then pass into a collector plate section made up of series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6kv-7kv) (collecting section) as the particles, which repel, while the interleaving plates are grounded, which attract and collect the contaminants. The contaminants are held in these plates until they are washed away.

Efficient : Purifier collects the particle as micro as 0.01 microns at a rate of 99%

Flexible : Modularized parts are easy to assemble as per different air-flow and requirements

Convenient : Drawer-style modularized parts are easy to fix and maintain

Advanced : Electrostatic power control system adjusts the electric field intensity automatically

Safe : Safety system automatically protects all units by the flashing tracking

Stable : Overload protection in the power system ensures the stable running.

Economic : Long term service, lower power consumption, less space occupation

ALL THE LAST SECTIONS ARE enclosed in a double skin penta post aluminium profile construction with the mechanical / electronic filters, carbon filters and fan fitter inside the cabinet, the outer skin is 0.5mm pre-painted Gl or GSS and the inner skin is of 270 gsm 0.5mm plain gss. the framework is made of extruded aluminium hollow profiles. the standard sandwich panel is 25 mm thick filled with either rockwool, or fiberglass or puf as insulation material, the cabinet can also be manufactured with 50 mm thick panels if required, the cabinet has removable type access doors for cleaning, maintenance & replacemnent of filters. the entire cabinet is mounted on a galvanized steel c-channel with same reinforcements across the unit base. the cabinet can also be supplied with a drain pan and drain connection if required for removal of excess oil and grease flowing down the specific filters, the unit can also be manufactured in section for ease of transpor- taion and handling.

METALLIC PRE-FILTER (G2 GRADE):
Metallic washable pre-filters with 2″ thickness (4″ thick- ness also available on request) having multiple layers of pleated galvanized wire as a standard metal media are available in aluminum, G2 and SS construction formed into a compact maze of dirt catching surfaces. The metal media are available in aluminium, G2 and SS Construc- tion. Owing to their excellent dirt holding capacity and ability to perform in high moisture conditions, they are suitable for use as grease filters in kitchen hoods. The average arrestance is 75-85% and classified as G2 in accordance with EN779 Standard.

This filter is designed to remove high oil and grease content from the exhaust air. The metallic filter is washable type and requires regular maintenance by washing the filter in a solution of detergent & warm water and dried with compressed air.

 

  1. PLEATED MEDIA PRE-FILTER (G4 GRADE)

    These Filters Feature 100% Synthetic Media Pack Which Provides Excellent Performance In Conditions Of High Relative Humidity And Moisture. The Pleated Media Pack Is Housed Within A Sturdy Double Walled, Die Cut Box, Beverage Board Frame. On The Air Leaving Side Of The Media Pack, A Wire-mesh Pleat Support Grid Maintains Equidistant Spacing Between Pleats, Ensuring That The Dust Is Collected Evenly Over The Entire Surface Of The Media. The Filters Are Available In 2" & 4" Thickness. These Filters Are Classified G4 In Accordance With En779 Standard. This Filter Should Be Used If Exhaust Air Includes Carbon Sooth From Charcoal Grills And Barbeques. The Pleated Media Filters Are Replaceable Type And Needs To Be Replaced Every 2-4 Weeks Depending On The Type Of Cooking Load (Low / Medium / High).

  2. RIGID BAG FILTERS (F8 CLASS)

    Single header rigid bag filters are designed to handle turbulent airflow and are suitable for high temperature and high humidity operation making them ideal for kitch- en extract airflow. The filters are classified F8 in accor- dance with EN779 Standard. The rigid bag filters have galvanized steel headers and cell sides for better rigidi- ty & corrosion resistance. The rigid bag filters are replaceable type and need to be replaced every 3-4 months depending on the type of cooking load (low / medium/high).

  3. CANISTER TYPE CARBON FILTER

    The carbon filter has a galvanized steel frame measuring 610mm x 610mm x 70mm width with provision to fit 16 canisters filled with carbon media to control odor. The canisters are made of galvanized steel with each canister measuring 145mm in diameter and 600mm in length. Each canister can hold up to 2.8 kg of carbon media. Each frame has 16 canisters with a total of 45 kg of carbon media. The carbon cartridges are replaceable type and needs to be replaced in 12-18 months depending on the type of cooking load (low / medium / high).

  4. CASSETTE TYPE CARBON FILTER

    Cassette type medium duty filters with 1" thick 18" deep V Bank arrangement filled with carbon media which removes the odor. The cassette is constructed from high impact polystyrene and has zero leakage design. Each cassette is of size 6" x 12" x 18" and contains 3.6 kg of carbon media in each cassette, Various carbon media can be supplied as per project requirement and it is easily replaceable by removing the sliding trays from the cassette. The carbon media is replaceable type and the media needs to be replaced every 8-12 months depending on the concentration of the exhaust (low / medium/high).

  5. V TYPE PLEATED RIGID CARBON FILTERS

    Carbon filters having pleated compact filter with activated carbon media as standard. Other carbon media can be provided as per project requirement to control specif- ic odors. These are high impact polystyrene cells having pleat packs arranged in V shape to utilize maximum amount of media for the given face area, The filters can be installed or removed by sliding in the tracks provided in the cabinet. Each filter size is 24" x 24" x 11.5" thickness and contains 4.3 kg of densely packed granular micro- structure carbon ensuring higher effective active area per kg of media, resulting in high efficiency in odor removal. The filters are replaceable type and needs to be replaced every 5-6 months depending on the concen- tration of the exhaust (low / medium / high).

  6. FAN SECTION

    BACKWARD CURVED FAN
    The unit includes belt driven centrifugal backward curved Double Inlet Double Width fans with AMCA Certification. The fan Scroll is hot galvanized sheet steel. The impellers are manufactured from high grade cold rolled steel with epoxy coating. The impellers are statically & dynamically balanced from factory. All fan are fitted with high quality ball bearings. The motor is TEFC, class F isulation and IP55 protection. The motors are fitted on adjustable motor base plate for easy belt adjust- ment. Fan drivers are rated at %150 of maximum motor power. The fan motor assembly is mounted on spring vibration isolators. The fan carrier AMCA SEAL for certified air & sound performance rating.

  1. PLEATED MEDIA PRE-FILTER (G4 GRADE)

    These Filters Feature 100% Synthetic Media Pack Which Provides Excellent Performance In Conditions Of High Relative Humidity And Moisture. The Pleated Media Pack Is Housed Within A Sturdy Double Walled, Die Cut Box, Beverage Board Frame. On The Air Leaving Side Of The Media Pack, A Wire-mesh Pleat Support Grid Maintains Equidistant Spacing Between Pleats, Ensuring That The Dust Is Collected Evenly Over The Entire Surface Of The Media. The Filters Are Available In 2" & 4" Thickness. These Filters Are Classified G4 In Accordance With En779 Standard. This Filter Should Be Used If Exhaust Air Includes Carbon Sooth From Charcoal Grills And Barbeques. The Pleated Media Filters Are Replaceable Type And Needs To Be Replaced Every 2-4 Weeks Depending On The Type Of Cooking Load (Low / Medium / High).

  2. RIGID BAG FILTERS (F8 CLASS)

    Single header rigid bag filters are designed to handle turbulent airflow and are suitable for high temperature and high humidity operation making them ideal for kitch- en extract airflow. The filters are classified F8 in accor- dance with EN779 Standard. The rigid bag filters have galvanized steel headers and cell sides for better rigidi- ty & corrosion resistance. The rigid bag filters are replaceable type and need to be replaced every 3-4 months depending on the type of cooking load (low / medium/high).

  3. CANISTER TYPE CARBON FILTER

    The carbon filter has a galvanized steel frame measuring 610mm x 610mm x 70mm width with provision to fit 16 canisters filled with carbon media to control odor. The canisters are made of galvanized steel with each canister measuring 145mm in diameter and 600mm in length. Each canister can hold up to 2.8 kg of carbon media. Each frame has 16 canisters with a total of 45 kg of carbon media. The carbon cartridges are replaceable type and needs to be replaced in 12-18 months depending on the type of cooking load (low / medium / high).

  4. CASSETTE TYPE CARBON FILTER

    Cassette type medium duty filters with 1" thick 18" deep V Bank arrangement filled with carbon media which removes the odor. The cassette is constructed from high impact polystyrene and has zero leakage design. Each cassette is of size 6" x 12" x 18" and contains 3.6 kg of carbon media in each cassette, Various carbon media can be supplied as per project requirement and it is easily replaceable by removing the sliding trays from the cassette. The carbon media is replaceable type and the media needs to be replaced every 8-12 months depending on the concentration of the exhaust (low / medium/high).

  5. V TYPE PLEATED RIGID CARBON FILTERS

    Carbon filters having pleated compact filter with activated carbon media as standard. Other carbon media can be provided as per project requirement to control specif- ic odors. These are high impact polystyrene cells having pleat packs arranged in V shape to utilize maximum amount of media for the given face area, The filters can be installed or removed by sliding in the tracks provided in the cabinet. Each filter size is 24" x 24" x 11.5" thickness and contains 4.3 kg of densely packed granular micro- structure carbon ensuring higher effective active area per kg of media, resulting in high efficiency in odor removal. The filters are replaceable type and needs to be replaced every 5-6 months depending on the concen- tration of the exhaust (low / medium / high).

  6. FAN SECTION

    BACKWARD CURVED FAN
    The unit includes belt driven centrifugal backward curved Double Inlet Double Width fans with AMCA Certification. The fan Scroll is hot galvanized sheet steel. The impellers are manufactured from high grade cold rolled steel with epoxy coating. The impellers are statically & dynamically balanced from factory. All fan are fitted with high quality ball bearings. The motor is TEFC, class F isulation and IP55 protection. The motors are fitted on adjustable motor base plate for easy belt adjust- ment. Fan drivers are rated at %150 of maximum motor power. The fan motor assembly is mounted on spring vibration isolators. The fan carrier AMCA SEAL for certified air & sound performance rating.